So you have bought the latest high-tech home theater system. Now what? Here are the steps you need to take to set up your system. These steps include choosing the right audio device, TV, AV receiver, speakers, and in-ceiling or in-wall speakers. These steps will make your home theatre experience the best yet. Follow these steps to get the most out of your investment. Ensure that all of your equipment works and is in perfect working order.
5.1 surround sound
A 5.1 surround sound home theater system consists of six speakers: three front, two rear, and one dedicated subwoofer. The goal of a 5.1 surround sound home theater system is to deliver an immersive theater experience to its audience. Despite its name, a 5.1 home theater system is not only compatible with DVDs, but also works with Blu-ray and Dolby Digital media.
The best surround sound system should be able to produce high-definition audio. This means a subwoofer or a bass speaker that adds to the impact of movie explosions. However, if you’re a total nerd and want to spend a little extra time configuring your home theater, you can let your computer do all the work. There are several options for adjusting the volume levels and EQ, including placing a microphone and maximizing the sound in your room.
If you’re planning to upgrade to 7.1 surround sound, you can buy a receiver that processes 5.1 audio. The 7.1 receiver also sends the audio to the extra speakers through digital processing. Having two extra speakers will add an extra layer of sound, and will give your home theatre system an immersive experience. You may also want to invest in a subwoofer to get more depth and space to your surround sound system.
AV receiver
There are a few important steps you need to take when setting up your new home theatre system, including calibrating your AV receiver. While this process may take some extra time, it will ensure that your new system performs as well as possible. A calibration process will allow you to get your speakers as close to the original mix as possible. Listed below are some of the steps you need to take to calibrate your AV receiver for home theatre.
To begin with, the process is easy: you will need to plug your AV receiver into a power source. Then, connect the receiver to your TV using the HDMI cable. After this, plug in the other devices, such as DVDs and CDs, and then connect them with the HDMI cable. You’re almost done! Make sure to turn the TV on before starting the process. Then, plug in the power cords.
If you’re using a cable box, make sure it’s connected to your receiver’s HDMI port. Using an HDMI connection will eliminate the need to choose inputs on your amplifier and display. Additionally, you’ll need to add your account credentials to your receiver. Most AV receivers come with several different ports on the back, but you don’t have to use all of them. It’s important to choose the ones that suit your needs.
Speakers
When installing a home theater system, you should consider the position of the speakers. Generally speaking, the center speaker is the most important and should be placed right in front of the TV. You should also consider the positioning of the left and right speakers. While you may not use these speakers very often if you watch TV only occasionally or listen to high-quality stereo music, you should still invest in a good center speaker.
You can purchase separate speakers for your home theater system, or a combination of preamplifier and amplifier. If you are serious about your home theater, you will also want to invest in professional installation of these speakers. While wireless home speakers have become increasingly popular, wired speakers are still the preferred option. For this reason, even if you’re unsure of your ability to install speakers, you can always consult a professional.
You can also purchase a complete home theater audio system, which includes five speakers, a subwoofer, a DVD player, and all the necessary wiring. A sound bar is a thin, long bar containing several loudspeaker drivers. Many sound bars include a separate subwoofer. Another type of home theater system is called a component system. If you don’t want to purchase a full home theater audio system, you can choose a component system, which replaces the receiver with separate components.
In-wall or in-ceiling speakers
Before you begin installing your in-wall or in-ceiling speaker, you must know where to place them. They should be mounted between wall studs and positioned at ear-level when you’re sitting down. Make sure to measure the distance between the wall and ceiling and make sure there is adequate space to install them. Ensure that you have ample access to the area where you want to install your speakers by using a stud finder or a 90-degree hanger. Then, drill a small hole and feel around the area for any cables.
Before cutting into the wall and ceiling, use a stud finder to locate joists and studs in the area. Once you’ve identified the studs, you can use a drywall saw to cut out the speaker. Then, mark the ceiling joists and studs near the speaker location. You can also find a template for your ceiling speakers in the box that came with your speakers.
Before you begin, mark the wall with a stud finder. If you can’t find studs, you can also use a rare earth magnet to locate plasterboard screws. Move the magnet in circles to locate them. Make sure to mark the holes if you find multiple screws. If multiple screws are found in one row, it’s most likely a stud or frame brace.
Networked or smart receivers
There are numerous benefits of networked or smart receivers for home theater systems. Most of them can connect to the internet via Wi-Fi and are compatible with a wide range of streaming services. Others come with proprietary apps, such as Denon HEOS or Yamaha MusicCast. These devices also support Dolby Vision and 4K HDR video. You can choose between a networked or smart receiver to suit your specific needs.
Most AV receivers come with a variety of connections on their backs. These connectors make it easy to connect multiple audio devices. These connectors include HDMI, optical, and coaxial. HDMI is the most common connector, and some have several HDMI inputs. If you’re planning on connecting your home theatre system to a video source, you should find a receiver with the latest standards in these technologies.
A 5.1-channel receiver will power the front speakers, center channel speaker, and two surround speakers. The “5” refers to the number of amplified channels. A 5.1-channel receiver will also have a subwoofer. Often, a higher-priced receiver will come labeled with “.2”, which means it has two subwoofer outputs. Alternatively, it should have enough outputs for at least two subwoofers.
Power surge protection
When setting up your home theatre system, you should make sure that you protect all the electronic devices connected to your power source from electricity surges. Power surges are caused by lightning strikes, and large spikes of electricity can damage sensitive electronics. In addition to power cables, your home theater equipment will connect to speakers and HDMI cables. If you have a surge protector, it can block the spikes at the source and reroute them to grounding lines, protecting your connected electronics and providing peace of mind.
You can also invest in control strips that contain multiple outlets. Although these strips are convenient, you must avoid overloading them as they can cause overheating and even fire. You can try out different songs by using Bandnext, which will help you find music similar to your current favorite. This way, you can get a better idea of what kind of music you want to listen to. After all, you don’t want to end up with a ruined audio system!
The installation of a power manager can increase the performance of your home theatre. It will also improve the flow of electricity. By limiting power surges, a power manager will help protect your electronics and increase their lifespan. It can also help organize your home theater system and prevent it from malfunctioning. You can find a power manager at your local electronics store. There are several types of power managers available. Pick one that best suits your needs.